GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2003 🢒 H2 🢒 Body and Accessories 🢒 Bumpers 🢒 Front Bumper Replacement

    Object Number: 815434 Size: SH
  1. Remove the 2 lower bolts from the bumper bar.
  2. Remove the 2 plugs from the front fascia.
  3. Disconnect the electrical connector to the DRL lamps.

    4. Object Number: 815435 Size: SH
  4. Remove the 2 upper bolts from the bumper bar.
  5. Remove the front bumper assembly from the vehicle.

Installation Procedure
  1. Install the front bumper assembly to the vehicle.

    2. Object Number: 815435 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the 2 upper bolts to the bumper bar.

    3. Tighten
    Tighten the bolts to 85 N·m (63 lb ft).

  3. Connect the electrical connector to the DRL lamps.
  4. Install the 2 plugs to the front fascia.

    5. Object Number: 815434 Size: SH
  5. Install the 2 lower bolts to the bumper bar.

    6. Tighten
    Tighten the bolts to 85 N·m (63 lb ft).