GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2003 🢒 H2 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Inside Handle Replacement

Removal Procedure

    Object Number: 862267 Size: SH
  1. Open the door.
  2. Remove door trim panel. Refer to Front Side Door Trim Panel Replacement .
  3. Release the inside door handle rod retention clip (1).
  4. Remove the fastener (2) retaining the door handle (3) to the door.
  5. Remove the door handle by sliding the handle out of the retention slots (4).

Installation Procedure

    Object Number: 862267 Size: SH
  1. Position the door handle in the retention slots (4).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the fastener (2) retaining the door handle to the door.

    3. Tighten
    Tighten the fasteners to 9 N·m (7 lb ft).

  3. Attach the inside door handle rod retention clip (1).
  4. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .
  5. Close the door.