Schematic Reference: Door Lock/Indicator Schematics

Connector End View Reference: Power Door Systems Connector End Views

Did you perform the Door Systems Diagnostic System Check?

Go to Step 2

Go to Diagnostic System Check - Door Systems

Activate the door lock switches to the lock and unlock positions.

Do both rear passenger doors lock and unlock?

Go to Step 3

Go to Power Door Locks Inoperative

Is the liftgate lock actuator inoperative?

Go to Step 4

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

1. Disconnect the liftgate lock actuator.
2. With a test lamp connected to a good ground, probe the lock actuator lock circuit at the lock actuator harness connector.
3. Activate a door lock switch to lock position.

Does the test lamp illuminate?

Go to Step 5

Go to Step 7

1. With a test lamp connected to a good ground, probe the lock actuator unlock circuit at the lock actuator harness connector.
2. Activate a door lock switch to unlock position.

Does the test lamp illuminate?

Go to Step 6

Go to Step 8

Inspect for poor connections at the harness connector of the liftgate lock actuator. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 10

Go to Step 9

Repair the open the lock actuator lock circuit. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 10

--

Repair the open in the lock actuator unlock circuit. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 10

--

Replace the liftgate lock actuator. Refer to Liftgate Lock Actuator Replacement in Body Rear End.

Did you complete the repair?

Go to Step 10

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2