- In order to adjust the glass height, the sunroof glass must be in the zero, closed, position.
Important: Do not remove the screws from the sunroof mechanism.
- Loosen the 4 adjustment screws.
Notice: Refer to Fastener Notice in the Preface section.
- Adjust the rear glass panel (1) so that it is flush with the roof panel (3), 0-2.0 mm (0.079 in) above 3.
Tighten
Tighten all 4 adjustment screws to 4 N·m (35 lb in).
- Adjust the front glass panel (2) so that it is flush with the roof panel (3), 0-1.0 mm (0.040 in) below 3.
Tighten
Tighten all 4 adjustment screws to 4 N·m (35 lb in).