Removal Procedure
- Lower the headliner as necessary. Refer to
Headlining Trim Panel Replacement
in Interior Trim.
- Accessing the screw on the top side of the module, remove the sunshade panel rubber stops.
- Remove the sunshade panel by sliding rearward out of the sunroof module.
Installation Procedure
- Install the sunshade panel by sliding forward into the sunroof module.
Notice: Refer to Fastener Notice in the Preface section.
- Install the sunshade panel rubber stops.
Tighten
Tighten the stop screws to 3 N·m (26 lb in).
- Install the headliner. Refer to
Headlining Trim Panel Replacement
in Interior Trim.