GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2003 🢒 H2 🢒 Body and Accessories 🢒 Body Rear End 🢒 Liftgate Latch Replacement

Removal Procedures
  1. Open the liftgate.

    2. Object Number: 831323 Size: SH
  2. Remove the fasteners (1) retaining the latch to the liftgate.
  3. Disconnect the electrical connector (2) from the latch.
  4. Disconnect the latch release cable (3) by releasing the retainer and removing the cable end from the cup.
  5. Remove the latch from the liftgate.

Installation Procedure

    Object Number: 831323 Size: SH
  1. Connect the electrical connector (2) to the latch.
  2. Connect the latch release cable by placing the cable end in the cup and securing the retainer (3) to the latch.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the fasteners (1) retaining the latch to the liftgate.

    4. Tighten
    Tighten fasteners to 25 N·m (19 lb ft).

  4. Inspect the latch for proper operation.