Three-Dimensional Measurements
Three-dimensional measurements are provided in the absences of dimension information from your equipment supplier. Universal three-dimensional measuring equipment is required to use these numbers. You may need to adjust the height dimensions to match the datum height of your equipment. Only the width dimensions can be used to measure point-to-point. All holes, slots and fasteners are measured to the center.
Location | Description | Length | Width | Height |
|---|---|---|---|---|
1 | Datum Line | 0 | 0 | 0 |
2 | Center Line | 0 | 0 | 0 |
3 | Zero Line, 27 mm x 17.5 mm slot | 0 | 522 mm | 306 mm |
a | 13 mm Tow Hook Hole | 1415 mm | 454 mm | 538 mm |
b | 16.5 mm Bumper Attachment | 1286 mm | 340 mm | 400 mm |
c | 20 mm x 16 Slot | 1119 mm | 600 mm | 302 mm |
d | 32 mm x 17.5 Slot | 2102 mm | 598 mm | 545 mm |
e | 14.5 mm hole | 3047 mm | 500 mm | 520 mm |
All dimensions are measured in millimeters, from a zero line, center line, and a common datum. All dimensions are symmetrical, unless otherwise specified. | ||||
Point to Point Measurements
Point-to-point measurements are for reference only. Use these measurements for diagnosis for validating. Point-to-point measurements do not afford the accuracy that 3-Dimensional measuring systems have. Point-to-point measurements are duplicated with tram bar pointers set at equal lengths. All holes, slots and fasteners are measured to the center.
Location | Point to Point |
|---|---|
a | 1417 mm |
b | 1298 mm |
c | 1122 mm |
d | 982 mm |
e | 950 mm |
f | 1449 mm |
g | 2220 mm |
h | 1550 mm |
i | 1585 mm |
j | 1548 mm |
k | 1719 mm |
