Assist Step Replacement Tubular BVE

1. Remove the nuts and the bolts.
2. Remove the assist step from the vehicle.

1. Perform the following procedure before installing the bolts.

•	Remove all traces of the original adhesive patch.

•	Clean the threads of the bolt with denatured alcohol or equivalent and allow to dry.

•	Apply Threadlocker GM P/N 12345382 (Canadian P/N 10953489).

Important: Using a level, secure the fasteners for the 2 inner brackets first. The assist step should be held level in relationship to the vehicle. Secure the fasteners for the outer brackets after the inner fasteners have been torqued.




2. Install the assist step to the vehicle. An assistant may be necessary for this step.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the nuts and the bolts.

Tighten
Tighten the nuts to 50 N·m (39 lb ft).

Assist Step Replacement Removable U Step

1. Remove the securing knob.



2. Remove the step from the vehicle.

1. Install the step to the vehicle.



2. Install the securing knob and hand tighten.