GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .
  3. Remove the window. Refer to Front Side Door Window Replacement .

  4. Object Number: 838657  Size: SH
  5. Disconnect the outside door handle rod (1) by releasing the retaining clip (2).

  6. Object Number: 838673  Size: SH
  7. Disconnect the lock cylinder rod (1) by releasing the retainer clip.
  8. Apply a piece of masking tape across the door handle, on the outside of the door, to secure the handle while removing the fasteners.

  9. Object Number: 838664  Size: SH
  10. Remove the 3 nuts (1) retaining the door handle.
  11. Remove the door handle.

Installation Procedure

  1. Position the door handle in place on the door.
  2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 838664  Size: SH
  3. Install the 3 nuts (1) that retain the door handle to the door.
  4. Tighten
    Tighten the nuts to 9 N·m (7 lb ft).


    Object Number: 838657  Size: SH
  5. Connect the outside door handle rod (1) by securing the retention clip (2).

  6. Object Number: 838673  Size: SH
  7. Connect the lock cylinder rod by securing the retainer clip (1).
  8. Install the window. Refer to Front Side Door Window Replacement .
  9. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  10. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .
  11. Operate the door handle to check for proper operation.