Subject: | Recommended Idler Arm Grease Fitting Due to Limited Access |
Models: | 2003 HUMMER H2 |
The idler arm on the HUMMER H2 has a grease fitting near the top end of the shaft facing the right-hand frame rail. Access to this fitting is very limited and may be accomplished, although not easily, with the use of a 90° grease gun adapter. However, to assure an adequate lubrication at each maintenance interval, it is recommended that the grease fitting be replaced with a 90° style fitting, P/N 09411019 pointing upward. Steps are being taken to implement this change in production.
Part Number | Description |
---|---|
09411019 | 90° Grease Fitting |
Parts are currently available from GMSPO.
For vehicles repaired under warranty, use:
Labor Operation | Description | Labor Time |
---|---|---|
E7960 | Arm, Steering Idler - Replace | 0.3 hr |