Service VME - Loose Outside Rear View Mirrors

When servicing the vehicle with the VIN you entered, the following diagnosis might be helpful if the vehicle exhibits the described symptoms.

Should you encounter an H2 with looseness at the pivot point of the outside rear view mirrors, cycle the electronic fold-in feature three times to resyncronize the mirrors with the detents. This is necessary if the mirrors have previously been folded back manually. If this does not correct the problem, the mirror will need to be replaced.

Please follow this diagnosis process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed. If these steps do not resolve the condition, please contact GM TAC for further diagnostic assistance. This diagnostic approach was developed for the vehicle with the VIN you entered and should not be automatically be used for other vehicles with similar symptoms.