Removal Procedure
- Remove the left hand corner brace from the
cowl.
- Remove the TAC module mounting nuts.
- Disconnect the TAC module electrical connectors from the TAC module.
Installation Procedure
- Connect the TAC module electrical connectors
to the TAC module.
Notice: Refer to Fastener Notice in the Preface section.
- Install the TAC module onto the studs and install the mounting nuts.
Tighten
Tighten the TAC mounting nuts to 9 N·m
(80 lb in).
- Install the left hand corner brace.
Tighten
Tighten the corner brace bolts to 25 N·m
(18 lb ft).