GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the nut from the spring bumper stud.
  3. Remove the spring bumper.

Installation Procedure

  1. Install the spring bumper.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the nut to the spring bumper stud.
  4. Tighten
    Tighten the nut to 30 N·m (22 lb ft).

  5. Lower the vehicle.