GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2004 🢒 H2 🢒 Restraints 🢒 Seat Belts 🢒 Rear Seat Center Retractor Side Belt Replacement

Caution: To avoid personal injury to the occupants of the vehicle, observe the following precautions:

   • More than one supplier's seat belts are used, therefore, install ONLY the seat belt components specified in the GM parts catalog.
   • To verify that the correct seat belt components were installed, insert the seat belt latch in the seat belt buckle. The latch must be fully seated and be retained in the buckle until purposely released.

Removal Procedure

    Object Number: 811802 Size: SH
  1. Remove the seat belt guide cover (1).
  2. Remove the rear seat armrest. Refer to Rear Seat Armrest Replacement in Seats.

    3. Object Number: 811807 Size: SH
  3. Release the J-Clip from under the center armrest.
  4. Remove the nut from the seat belt retractor.

    5. Object Number: 811814 Size: SH
  5. Remove the bolt (1) from the seat belt anchor.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 811814 Size: SH
  1. Install the bolt (1) to the seat belt anchor.

    2. Tighten
    Tighten the bolt to 52 N·m (38 lb ft).


    Object Number: 811807 Size: SH
  2. Install the nut to the seat belt retractor.

    3. Tighten
    Tighten the nut to 52 N·m (38 lb ft).

  3. Install the J-Clip under the center armrest.

    4. Object Number: 811802 Size: SH
  4. Install the rear seat armrest. Refer to Rear Seat Armrest Replacement in Seats.
  5. Install the seat belt guide cover (1).