If your vehicle has this feature, the controls for the memory function are located on the driver's door.
These buttons are used to program and recall memory settings for the driver's seat, both the driver's and passenger's outside mirror, the radio station presets, and the previously used climate control system settings. The settings for these features can be personalized for both driver 1 and driver 2. Driver 1 or driver 2 corresponds to the memory buttons labeled 1 and 2 on the driver's door and the numbers on the back of the remote keyless entry transmitters.
To store the memory settings, do the following:
- Adjust the driver's seat (including the seatback recliner, lumbar, and side wing area), both of the outside mirrors, and the radio station presets to your preference.
- Press and hold the 1 or 2 (for driver 1 or 2) button of the memory control for three seconds. A double chime will sound to let you know that the position has been stored.
To repeat the procedure for a second driver, follow the preceding steps, but press the other numbered memory control button.
Each time button 1 or 2 is pressed and released while the vehicle is in PARK (P), a single chime will sound and the memory position will be recalled.
If you use the unlock button on the remote keyless entry transmitter to enter your vehicle, the preset driver's seat, mirror positions, radio station presets and the previously used climate control system settings will be recalled if programmed to do so through the Driver Information Center (DIC). See DIC Operation and Displays . The numbers on the back of the transmitters, 1 or 2, correspond to the numbers on the memory controls.
The seat, radio station presets and mirror positions can also be recalled when placing the key in the ignition if programmed to do so through the Driver Information Center (DIC). See DIC Operation and Displays .
To stop recall movement of the memory seat feature at any time, press one of the memory buttons or power seat controls.
Easy Exit Seat
The controls for this memory function are located on the driver's door.
(Easy Exit Seat): This button is used to program and recall the desired driver's seat position when exiting/entering the vehicle. The seat position, can be personalized for both driver 1 and driver 2.To store the seat exit position for driver 1 or 2, do the following:
- Press and release the 1 or 2 button or press the unlock button on the desired remote keyless entry transmitter. The seat will move to the stored memory position.
- Adjust the seat to the desired exit position.
- Press and hold the exit button of the memory control for three seconds. A double chime will sound to let you know that the position has been stored for the identified driver (1 or 2).
To use the seat exit position, do one of the following:
| • | Press the exit button on the memory control. |
| • | Or, if this feature is activated in the DIC, then remove the key from the ignition; the seat will then move to the exit position. |
See DIC Operation and Displays for more information on activating this feature in the DIC.
