Info - Availability of Replacement Rear Tail Lamp Outboard Retainer Clips After Lamp Assembly Removal/Repositioning for Bulb Replacement or Service
| Subject: | Availability of Replacement Rear Tail Lamp Outboard Retainer Clips After Lamp Assembly Removal/Repositioning For Bulb Replacement or Service |
| Models: | 2003-2004 HUMMER H2 |
Do This | Don't Do This |
|---|---|
Replace the clip. | Replace the tail lamp. |
On some vehicles, when the rear tail lamp assembly is removed or repositioned for bulb replacement or service, the outboard retainer clips bend or may fail. If an outboard retainer clip fails, replace the clip with P/N 12335952. For the location of the retainer clip, refer to the illustration above.
Parts Information
Part Number | Description | Qty |
|---|---|---|
12335952 | Clip, Tail Lamp Ret.- Outboard | 2 (per lamp) |
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use:
Labor Operation | Description | Labor Time |
|---|---|---|
B9640 | Lamp Assembly, Exterior-Stop,Tail And Turn Signal - Right - Replace | Use published labor operation time |
B9641 | Lamp Assembly, Exterior-Stop,Tail And Turn Signal - Left - Replace | Use published labor operation time |
