For 1990-2009 cars only
SMU - Revised Shock Absorber Bolt Tightening Specification
| Subject: | Revised Shock Absorber Bolt Tightening Specification |
| Models: | 2003-2005 HUMMER H2 |
This bulletin is being issued to revise the shock absorber tightening specification in the Rear Suspension sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
The revised specification is as follows: Shock Absorber Bolts -- 115 N·m (85 lb ft).
