Tools Required

J 46406 Fan Clutch Remover and Installer

1. Remove the fan shroud. Refer to Fan Shroud Replacement .
2. Install J 46406 to the fan clutch.



3. Remove the fan hub nut from the water pump.



4. Remove the bolts from the fan clutch.
5. Separate the fan clutch from the fan blade.

Caution: Do not use or attempt to repair a damaged cooling fan assembly. Replace damaged fans with new assemblies. An unbalanced cooling fan could fly apart causing personal injury and property damage.

1. Install the fan clutch to the fan blade.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the bolts to the fan clutch.

Tighten
Tighten the bolts to 23 N·m (17 lb ft).




3. Install the fan blade to the vehicle.



4. Install J 46406 to the fan clutch.

Tighten
Tighten the nut to 59 N·m (44 lb ft).

5. Install the fan shroud. Refer to Fan Shroud Replacement .