GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2005 🢒 H2 🢒 Engine 🢒 Engine Exhaust 🢒 Exhaust Heat Shield Replacement - Dash Panel

Removal Procedure
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the engine protection shield bolts and shield. Refer to Engine Protection Shield Replacement .

    3. Object Number: 707396 Size: SH
  3. Remove the exhaust heat shield nuts.
  4. Remove the exhaust heat shield from the dash panel studs (1, 3).

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 707396 Size: SH
  1. Install the exhaust heat shield to the dash panel studs (1, 3).
  2. Install the exhaust heat shield nuts.

    3. Tighten
    Tighten the nuts to 9 N·m (80 lb in).

  3. Install the engine protection shield and bolts. Refer to Engine Protection Shield Replacement .

    4. Tighten
    Tighten the bolts to 20 N·m (15 lb ft).

  4. Lower the vehicle.