GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2005 🢒 H2 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Rear Window Wiper and Washer Switch Replacement

Removal Procedure

    Object Number: 816356 Size: SH
  1. Remove the driver side instrument panel (I/P) accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement - Left Side in Interior Trim.

    2. Object Number: 1453843 Size: SH
  2. Release the midgate switch clips and partially remove the midgate switch from the I/P switch carrier.
  3. Disconnect the electrical connector from the midgate switch (1).
  4. Remove the midgate switch (1) from the vehicle.

Installation Procedure

    Object Number: 1453843 Size: SH
  1. Connect the electrical connector to the midgate switch (1).
  2. Align the switch (1) to the I/P and snap into place.

    3. Object Number: 816356 Size: SH
  3. Install the driver side I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement - Left Side in Interior Trim.