GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
HUMMER
🢒
2005
🢒
H2
🢒
Body
🢒
Doors
🢒 Rear Side Door Trim Panel Replacement
Tools Required
J 38778
Door Trim Pad Clip Remover
Removal Procedure
Remove the upper door trim panel. Refer to
Upper Extension Trim Panel Replacement
.
Remove the rear door handle bezel. Refer to
Rear Door Inside Handle Bezel Replacement
Remove the door panel retaining screw located in the handle bezel opening.
Use
J 38778
to release the retaining clips from the door trim panel.
Disconnect the electrical wiring harness connectors.
Remove the door trim panel from the vehicle.
Inspect for missing or broken retaining fasteners. Replace the fasteners as necessary.
Installation Procedure
Connect the electrical wiring harness connectors.
Install the door trim panel to the vehicle.
2.1.
Align the door trim panel retaining clips with the openings in the door.
2.2.
Push inward on the door trim panel to engage the fasteners.
Install the door panel retaining screw.
Install the rear door handle bezel. Refer to
Rear Door Inside Handle Bezel Replacement
.
Install the upper door trim panel. Refer to
Upper Extension Trim Panel Replacement
.