GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2005 🢒 H2 🢒 Body 🢒 Doors 🢒 Front Side Door Window Module Replacement

Removal Procedure
  1. Remove the trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .
  3. Position the window in a position that allows access to the window clamp bolts.

    4. Object Number: 838386 Size: SH
  4. Loosen the fasteners on the window clamps.
  5. Position the window in the full up position and tape in place.
  6. Disconnect the window motor electrical connector.
  7. Remove the 5 fasteners (1) retaining the window module to the door.
  8. Remove the window module from the door.

Installation Procedure

    Object Number: 838386 Size: SH
  1. Place the window module in position in the door.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the 5 fasteners (1) to the window regulator.

    3. Tighten
    Tighten the fasteners to 9 N·m (7 lb ft).

  3. Connect the window motor electrical connector.
  4. Place the window in the window clamps, and tighten the clamps.

    5. Tighten
    Tighten the clamps to 9 N·m (7 lb ft).

  5. Operate the window module to inspect for proper operation.
  6. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  7. Install the trim panel. Refer to Front Side Door Trim Panel Replacement .