GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2005 🢒 H2 🢒 Body 🢒 Lighting Systems 🢒 Hazard and Turn Signal Flasher Replacement

Removal Procedure

    Object Number: 786886 Size: SH
  1. Remove the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement in Instrument Panel, Gages and Console.
  2. On the back side of the fuse block release the retainer while pulling the flasher (1) inboard.
  3. Remove the flasher (1) from the fuse block.

Installation Procedure

    Object Number: 786886 Size: SH
  1. Install the flasher (1) to the fuse block until the retainer clicks into place.
  2. Install the knee bolster. Refer to Driver Knee Bolster Panel Replacement in Instrument Panel, Gages and Console.