GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2005 🢒 H2 🢒 Body 🢒 Seats 🢒 Front Seat Trim Panel Replacement

Removal Procedure
  1. Ensure the seat is in the full upward position.

    2. Object Number: 833483 Size: SH
  2. Remove the trim panel (1) by pulling outward in order to disengage the retaining clip.
  3. Remove the screws retaining the seat back release handle and the seat recliner handle and remove the handles, if equipped.
  4. Remove the trim panel from the seat.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.

  1. Position the trim panel on the seat.

    2. Object Number: 833483 Size: SH
  2. Instal the trim panel (1) to the seat by pushing in until the retaining clips are locked in place.
  3. Install the screws retaining the seat back release handle and the seat recliner handle to the seat, if removed.

    4. Tighten
    Tighten the screws to 2 N·m (18 lb in).