GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2005 🢒 H2 🢒 Body 🢒 Seats 🢒 Rear Seat Cushion Cover and Pad Replacement

Removal Procedure
  1. Remove the rear passenger seat from the vehicle. Refer to Rear Seat Replacement or Rear Number 2 Seat Replacement .

    2. Object Number: 276675 Size: MH
  2. Remove the rear passenger seat riser.
  3. Remove the seat cushion plastic cover from the seat cushion frame.
  4. Remove the hog rings and/or the J-clips from the rear edge of the seat cushion cover (3).
  5. Disconnect the rear heater connector, if equipped.
  6. Remove the seat belt buckles, if required.
  7. Remove all of the remaining hog rings, and/or the J-clips that are retaining the seat cushion cover (3) to the seat cushion frame (8).
  8. Release the hook, and the loop-strips that are retaining the seat cushion cover to the foam pad (4).
  9. Remove the center screw retaining the latch cover.
  10. Remove the seat cushion cover from the foam pad.

Installation Procedure

    Object Number: 276675 Size: MH
  1. Install the seat cushion cover to the foam pad.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the center screw retaining the latch cover.

    3. Tighten
    Tighten the screw to 2 N·m (18 lb in).

  3. Engage the hook, and the loop-strips that are retaining the seat cushion cover (3) to the foam pad (4).
  4. Install the seat buckles, if removed.
  5. Connect the rear heater connector, if equipped.
  6. Install the hog rings, and/or the J-clips in order to retain the seat cushion cover to the seat cushion frame (8).
  7. Install the seat cushion plastic cover to the seat cushion frame.
  8. Install the rear passenger seat risers.
  9. Install the rear passenger seat to the vehicle. Refer to Rear Seat Replacement or Rear Number 2 Seat Replacement .