GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2005 🢒 H2 🢒 Body 🢒 Wiring Systems 🢒 Evaporative Emission Canister Replacement

Removal Procedure

    Object Number: 832909 Size: SH
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect EVAP solenoid electrical connector.
  3. Remove the evaporative emission (EVAP) canister mount bolts.

    4. Object Number: 832914 Size: SH
  4. Disconnect the pipes at the EVAP canister.
  5. Remove the EVAP canister from the vehicle.

Installation Procedure

    Object Number: 832909 Size: SH
  1. Install the EVAP canister to the vehicle.
  2. Connect EVAP solenoid electrical connector.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the EVAP canister mounting bolts.

    4. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).


    Object Number: 832914 Size: SH
  4. Connect the pipes to the EVAP canister.
  5. Lower the vehicle.