GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2005 🢒 H2 🢒 Steering 🢒 Power Steering System 🢒 Power Brake Booster Outlet Hose Replacement

Removal Procedure

    Notice: Do not start the vehicle with any power steering gear inlet or outlet hoses disconnected. When disconnected, plug or cap all openings of components. Failure to do so could result in contamination or loss of power steering fluid and damage to the system.


    Object Number: 795541 Size: SH
  1. Install a drain pan under the vehicle.
  2. Remove the brake booster outlet hose from the brake booster.

    3. Object Number: 795538 Size: SH
  3. Remove the clamp retaining the brake booster outlet hose (1) to the power steering pump.
  4. Remove the brake booster outlet hose from the vehicle.

Installation Procedure

    Object Number: 795541 Size: SH

    Notice: The inlet and outlet hoses must not be twisted during installation. Do not bend or distort the inlet or outlet hoses to make installation easier. Failure to follow these procedures could result in component damage.

  1. Route the hose in the same position the hose occupied prior to removal.
  2. Install the brake booster outlet hose to the brake booster .

    3. Position the clamp at the end of the hose.


    Object Number: 795538 Size: SH
  3. Install the brake booster outlet hose (1) to the power steering pump .

    4. Position the clamp at the end of the hose.

  4. Remove the drain pan from under the vehicle.
  5. Bleed the power steering system. Refer to Power Steering System Bleeding .