GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2005 🢒 H2 🢒 Restraints 🢒 Seat Belts 🢒 Seat Belt Retractor Replacement - No. 1 Rear

Removal Procedure
  1. Remove the door sill plate. Refer to Front Side Door Sill Plate Replacement or Rear Side Door Sill Plate Replacement .
  2. Remove the lower anchor bolt from bodyside panel.
  3. Remove the lock pillar trim panel. Refer to Body Lock Pillar Trim Panel Replacement .
  4. Route the belt through trim panel.

    5. Object Number: 833563 Size: SH
  5. Remove the bolt from the upper guide.
  6. Remove the bolt from the retractor.
  7. Remove the seatbelt anchor bolt cover.
  8. Remove the floor anchor bolt.
  9. Remove the assembly from the vehicle.

Installation Procedure
  1. Install the assembly to vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the bolt to the retractor.

    3. Tighten
    Tighten the bolt to 55 N·m (41 lb ft).

  3. Install the bolt to the upper guide.

    4. Tighten
    Tighten the bolt to 55 N·m (41 lb ft).


    Object Number: 833563 Size: SH
  4. Route the belt through trim panel.
  5. Install the lock pillar trim panel. Refer to Body Lock Pillar Trim Panel Replacement .
  6. Install the lower anchor bolt to bodyside panel.

    7. Tighten
    Tighten the bolt to 55 N·m (41 lb ft).

  7. Install the floor anchor bolt.

    8. Tighten
    Tighten the bolt to 55 N·m (41 lb ft).

  8. Install the seat belt anchor bolt cover.
  9. Install the door sill plate. Refer to Front Side Door Sill Plate Replacement or Rear Side Door Sill Plate Replacement .