GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2005 🢒 H2 🢒 Restraints 🢒 Seat Belts 🢒 Seat Belt Retractor Replacement - No. 2 Rear

Removal Procedure
  1. Remove the seat from the vehicle. Refer to Rear Number 2 Seat Replacement .
  2. In order to release the seat back, manually rotate the center latch. Rotate the latch until the seat back releases the seat back.

    3. Object Number: 768624 Size: SH
  3. Remove the latch cover (1) from the seat.

    4. Object Number: 768625 Size: SH
  4. Remove the seat belt anchor bolt (1) from the cushion frame.
  5. Remove the head rests. Refer to Head Restraint Replacement .
  6. Remove the seat back cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement .
  7. Remove the seat back frame. Refer to Rear Seat Back Cushion Frame Replacement .

    8. Object Number: 768626 Size: SH
  8. Remove the seatbelt retractor bolt cover (1).
  9. Remove the retractor mounting bolts (2).

    10. Object Number: 768627 Size: SH
  10. Remove the handle mounting screws (1).
  11. Partially remove the seat cushion cover by separating the cushion trim J-strips.

    12. Object Number: 768629 Size: SH
  12. Remove the bolts attaching the buckle to the seat cushion frame.
  13. Remove the buckle and the latch from the seat frame.

Installation Procedure
  1. Install the buckle and the latch to the seat frame.

    2. Object Number: 768629 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the buckle bolts.

    3. Tighten
    Tighten the bolts to 55 N·m (41 lb ft).

  3. Connect the seat cushion cover by joining the cushion trim J-strips.

    4. Object Number: 768627 Size: SH
  4. Install the handle mounting screws (1).

    5. Tighten
    Tighten the screws to 7 N·m (61 lb in).

  5. Install the seat back frame. Refer to Rear Seat Back Cushion Frame Replacement .

    6. Object Number: 768626 Size: SH
  6. Install the retractor mounting bolt (2).

    7. Tighten
    Tighten the bolt to 55 N·m (410 lb ft).

  7. Install the seatbelt retractor bolt cover (1).
  8. Install the seat back cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement .
  9. Install the headrests. Refer to Head Restraint Replacement .

    10. Object Number: 768625 Size: SH
  10. Install the seat belt anchor screw (1) to the cushion frame.

    11. Tighten
    Tighten the bolt to 55 N·m (41 lb ft).


    Object Number: 768624 Size: SH
  11. Install the latch cover (1) to the seat.

    12. Tighten
    Tighten the screw to 2 N·m (18 lb in).

  12. In order to secure the seat back, manually rotate the center latch. Rotate the latch until the seat back clicks into position.
  13. Install the seat to the vehicle. Refer to Rear Number 2 Seat Replacement .