Subject: | 2005 HUMMER H2 SUT Midgate Rattle |
Models: | 2005 HUMMER H2 SUT |
Some early built 2005 HUMMER H2 SUT models (up to VIN 5H101000) may exhibit
a rattle in the midgate. The most probably cause for this is looseness between the
pieces of sheet metal that make up the midgate glass run channels on either the left
or right hand side. Gain access to the affected glass run channel by removing the
primary midgate seal in the area of the glass run channel and the upper lock pillar
trim. Replace the upper and lower spot welds on the run channel by using a drill and
fill weld procedure. Grind excess weld to assure that there is no interference with
the installation of the seal or the interior trim piece.