For 1990-2009 cars only
SMU - Revised Lower Control Arm Replacement
| Subject: | Revised Lower Control Arm Replacement |
| Models: | 2003-2007 HUMMER H2 |
This bulletin is being issued to revise the Lower Control Arm Replacement procedure in the Front Suspension sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
The front suspension lower control arm-to-frame bolts must be replaced after removal.
The torque specification for the lower control arm-to-frame bolt nuts has been revised to 215 N·m (160 lb ft).
