Air Inlet Grille Panel Replacement for HUMMER H2 2006

1. Remove the non-functional air inlet caps. Refer to Non-Functional Air Inlet Grille Panel Replacement .
2. Remove the wiper arms. Refer to Windshield Wiper Arm Replacement in Wipers/Washer Systems.



3. Disconnect the wiper hose connection (1).
4. Using a flat-bladed tool, remove the push-in retainers (2).
5. Remove the side fasteners.
6. Using a flat-bladed tool, release the 4 retainers (3) securing the air inlet grille to the vehicle.
7. Remove the air inlet grille from the vehicle.

1. Align the air inlet grille to the vehicle, and secure grille by ensuring all 4 retainers (3) are properly seated.
2. Connect the washer hose connection (1).
3. Install the push-in retainers.

Notice: Refer to Fastener Notice in the Preface section.

4. Install the side fasteners.

Tighten
Tighten the fasteners to 2.5 N·m (22 lb in).

5. Install the wiper arms. Refer to Windshield Wiper Arm Replacement in Wipers/Washer Systems.
6. Install the non-functional air inlet caps. Refer to Non-Functional Air Inlet Grille Panel Replacement .