GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2007 🢒 H2 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Instrument Panel Inflatable Restraint Module Switch Replacement

Removal Procedure

    Caution: Refer to SIR Caution in the Preface section.

  1. Remove the instrument panel (I/P) trim bezel. Refer to Instrument Cluster Trim Panel Replacement.

    2. Object Number: 412186 Size: SH
  2. Remove the I/P module switch from the lower right opening of the switch plate panel.
  3. Disconnect the I/P module switch electrical connector.

Installation Procedure
  1. Connect the I/P module switch electrical connector.

    2. Object Number: 412186 Size: SH
  2. Install the I/P module switch into the lower right opening of the switch plate panel.
  3. Install the instrument panel trim bezel. Refer to Instrument Cluster Trim Panel Replacement.