Schematic Reference: Wiper/Washer Schematics

Connector End View Reference: Wiper/Washer Connector End Views

DEFINITION: Windshield wipers are always ON.

Did you perform the Wiper/Washer System Description and Operation and perform the necessary inspections?

Go to Step 2

Go to Symptoms - Wiper/Washer Systems

1. Turn the windshield wiper/washer switch OFF.
2. Turn the ignition ON.

Are the windshield wipers always ON?

Go to Step 3

Go to Testing for Intermittent Conditions and Poor Connections

1. Disconnect the turn signal/multifunction switch connectors.
2. Turn the ignition ON.

Are the windshield wipers always ON?

Go to Step 4

Go to Step 6

1. Turn the ignition OFF.
2. Disconnect the windshield wiper motor and module connector.
3. Test the windshield wiper switch high signal circuit for a short to ground. Refer to Circuit Testing and Wiring Repairs .

Did you find and correct the condition?

Go to Step 10

Go to Step 5

Test the windshield wiper switch signal circuit for a short to ground. Refer to Circuit Testing and Wiring Repairs .

Did you find and correct the condition?

Go to Step 10

Go to Step 8

Inspect for poor connections at the windshield wiper/washer switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs .

Did you find and correct the condition?

Go to Step 10

Go to Step 7

Replace the windshield wiper/washer switch. Refer to Turn Signal Multifunction Switch Replacement .

Is the repair complete?

Go to Step 10

--

Inspect for poor connections at the windshield wiper motor. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs .

Did you find and correct the condition?

Go to Step 10

Go to Step 9

Replace the windshield wiper motor cover. Refer to Windshield Wiper Motor Cover Replacement - Front .

Is the repair complete?

Go to Step 10

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3