GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2007 🢒 H2 🢒 Body Systems 🢒 Fixed and Moveable Windows 🢒 Rear Side Door Window Replacement

Removal Procedure
  1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .

    3. Object Number: 838833 Size: SH
  3. Remove the run channel. Refer to Rear Side Door Window Channel Replacement .
  4. Remove the stabilizer. Refer to Rear Side Door Window Stabilizer Replacement .
  5. Remove the outer sealing strip. Refer to Rear Side Door Window Outer Sealing Strip Replacement .
  6. Loosen the clamps (1) securing the glass to the window module.
  7. Remove the window through the opening of the window frame.

Installation Procedure

    Object Number: 838833 Size: SH
  1. Slide the window through the opening of the window frame into position in the window clamps (1).
  2. Install the sealing strip. Refer to Rear Side Door Window Outer Sealing Strip Replacement .

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the run channel. Refer to Rear Side Door Window Channel Replacement .

    4. Tighten
    Tighten the clamps to 9 N·m (6 lb ft).

  4. Install the stabilizer. Refer to Rear Side Door Window Stabilizer Replacement .
  5. Operate the window to ensure proper operation.
  6. Install the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  7. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement .