- Remove the midgate inner panel. Refer to
Midgate Inner Panel Replacement .
- Loosen the midgate window run channel retaining screws. Refer to
Midgate Window Channel Replacement .
- Lower the midgate window out of the midgate weatherstrip.
- Remove the midgate window regulator adjustment covers (2) from the midgate inner panel.
- Loosen the lower regulator attachment nuts (3).
- Adjust the fore/aft position of the midgate window by turning the adjustment screws (1).
| • | To move the top edge of window rearward, turn the adjustment screws clockwise. |
| • | To move the top edge of the window forward, turn the adjustment screws counterclockwise. |
| • | Each revolution of the adjustment screw moves the top edge of the window 0.5 mm (0.02 in) forward or rearward. |
| • | Maximum adjustment is 6 revolutions in either direction. |
Notice: Refer to Fastener Notice in the Preface section.
- Install the lower regulator attachment nuts (3).
Tighten
Tighten the regulator attachment nuts to 25 N·m (18 lb ft).
- Install the midgate window run channel retaining screws. Refer to
Midgate Window Channel Replacement .
- Install the midgate window regulator adjustment covers (2) to the midgate inner panel.
- Install the midgate inner panel. Refer to
Midgate Inner Panel Replacement .
