GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2007 🢒 H2 🢒 Body Hardware and Trim 🢒 Instrument Panel and Console Trim 🢒 Console Shift Lever Bezel Replacement

Removal Procedure

    Object Number: 833294 Size: SH
  1. Loosen the locking screw that fastens the shift lever to the shifter.
  2. Remove the shifter.

    3. Object Number: 833291 Size: SH
  3. Using a flat-bladed tool, pry up on the bezel to release the clips.
  4. Disconnect the PRNDL lamps from the bezel.
  5. Remove the bezel.

Installation Procedures

    Object Number: 833291 Size: SH
  1. Connect the lamps to the bezel.
  2. Align the bezel to the center console.
  3. Push the bezel firmly into place to engage the clips.

    4. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 833294 Size: SH
  4. Install shift handle to shifter and use hex nut to fasten in place.

    5. Tighten
    Tighten the nut to 1.6 N·m (14 lb in).