GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2007 🢒 H2 🢒 Body Hardware and Trim 🢒 Instrument Panel and Console Trim 🢒 Driver Knee Bolster Panel Replacement

Removal Procedure
  1. Loosen and move the reward center console for access to the knee bolster bolt. Refer to Console Replacement .
  2. Remove the instrument panel cluster (IPC) trim. Refer to Instrument Cluster Trim Panel Replacement .

    3. Object Number: 832830 Size: SH
  3. Remove the screws/bolts that hold the knee bolster trim panel to the I/P.
  4. Remove the knee bolster trim.

Installation Procedure

    Object Number: 832830 Size: SH
  1. Install the knee bolster trim panel to the I/P.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the knee bolster trim panel screws.

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  3. Install the IPC trim. Refer to Instrument Cluster Trim Panel Replacement .
  4. Align and move the forward center console in place and fasten to the center console bracket. Refer to Console Replacement .