GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2007 🢒 H2 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Front Side Door Trim Panel Replacement

Tools Required

J 38778 Door Trim Pad Clip Remover

Removal Procedure

    Object Number: 833451 Size: SH
  1. Remove the door handle bezel. Refer to Front Side Door Inside Handle Bezel Replacement.
  2. Remove the door panel retaining screw located in the handle bezel opening.
  3. Remove the door window switch. Refer to Door Lock and Side Window Switch Replacement - Driver Side or Door Lock and Side Window Switch Replacement - Passenger Side .
  4. Use special tool J 38778 to release the door trim panel retaining clips.
  5. Disconnect the electrical wiring harness connectors.
  6. Remove the door trim panel from the vehicle.

Installation Procedure


    Object Number: 833451 Size: SH
  1. Connect the electrical wiring harness connectors.
  2. Install the door trim panel to the vehicle.
    3. 2.1. Align the door trim panel retaining clips with the openings in the door.
    2.2. Push inward on the door trim panel to engage the fasteners.
  3. Install the door window switch. Refer to Door Lock and Side Window Switch Replacement - Driver Side or Door Lock and Side Window Switch Replacement - Passenger Side .
  4. Install the door panel retaining screw within the handle bezel opening.
  5. Install the door handle bezel. Refer to Front Side Door Inside Handle Bezel Replacement .