GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2007 🢒 H2 🢒 Body Repair 🢒 Frame and Underbody 🢒 Rocker Panel Protector Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the assist step if equipped. Refer to Assist Step Replacement .
  3. Remove the EVAP canister vent valve bracket. Refer to Evaporative Emission Canister Vent Solenoid Valve Replacement .

    4. Object Number: 797217 Size: SH
  4. Remove the mounting bolts.
  5. Remove the rocker panel protector from the vehicle.

Installation Procedure

    Important: Do not tighten the fasteners until they have all been started.


    Object Number: 797217 Size: SH
  1. Install the rocker panel protector to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Loosely install all of the mounting bolts.

    3. Tighten
    Tighten the bolts to 50 N·m (37 lb ft).

  3. Install the EVAP canister vent valve bracket. Refer to Evaporative Emission Canister Vent Solenoid Valve Replacement .
  4. Install the assist step if equipped. Refer to Assist Step Replacement .
  5. Lower the vehicle.