GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
HUMMER
🢒
2007
🢒
H2
🢒
Power and Signal Distribution
🢒
Wiring Systems and Power Management
🢒 Electronic Traction Control Switch Replacement
Removal Procedure
Remove the center I/P trim panel. Refer to
Instrument Panel Center Trim Panel Replacement
.
Gently lift the retaining tabs and remove the traction control switch (1) from the instrument panel (I/P) assembly (2).
Disconnect the harness connector from the traction control switch (1).
Installation Procedure
Connect the harness connector to the traction control switch (1).
Install the traction control switch (1) into the I/P assembly (2).
Ensure that the switch (1) is secure into both retaining tabs.
Install the center I/P trim panel. Refer to
Instrument Panel Center Trim Panel Replacement
.