GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2007 🢒 H2 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Head Restraint Replacement

Removal Procedure

    Object Number: 867067 Size: SH
  1. Pull the head restraint to the full height position.
  2. Insert a pointed tool into the access hole (1) and press inwards.
  3. Pull the head restraint from the seat.
  4. Disconnect the video connector if the head restraint is equipped with the video display.

Installation Procedure
  1. Connect the video connector if the head restraint is equipped with the video display.

    2. Object Number: 867067 Size: SH
  2. Install the head restraint by pushing down on restraint until the restraint is fully seated.
  3. Pull up in order to ensure that the head restraint engages with the head restraint retainers (1).