GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2007 🢒 H2 🢒 Preface 🢒 Cautions and Notices 🢒 Radio Replacement

Removal Procedure

    Important: Record the lock code before removal, if equipped.

  1. Loosen and move the center console reward for access to the center trim panel. Refer to Console Replacement .
  2. Remove the screws that hold the trim plate - instrument panel (I/P) center from I/P. Refer to Instrument Panel Center Trim Panel Replacement .

    3. Object Number: 832843 Size: SH
  3. Remove the bolts that hold the radio to the I/P center stack.

    4. Object Number: 815848 Size: SH
  4. Disconnect the electrical connectors and the antenna connections from the rear of the radio.

    5. Object Number: 815852 Size: SH
  5. Remove the radio.

Installation Procedure

    Object Number: 815852 Size: SH
  1. Align the radio with the center stack and mounting holes.

    2. Object Number: 815848 Size: SH
  2. Connect the electrical connectors and the antenna connectors from the rear of the radio.

    3. Object Number: 832843 Size: SH
  3. Install the bolts that hold the radio to the I/P center stack.
  4. Align the trim panel I/P center to the I/P. Refer to Instrument Panel Center Trim Panel Replacement .
  5. Align and move the forward center console in place with the center console bracket. Refer to Console Replacement .
  6. Setup the new radio assembly. Refer to Control Module References .