GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2007 🢒 H2 🢒 General Information 🢒 General Information 🢒 Stabilizer Shaft Link Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 793299 Size: SH
  2. Remove the nuts from the link bolt assemblies.
  3. Remove the link bolts.
  4. Remove the link assemblies.

Installation Procedure

    Object Number: 793299 Size: SH
  1. Support the lower control arms at curb height.
  2. Perform the following procedure before installing the bolts:
    3. • Remove all traces of the original adhesive patch.
    • Clean the threads of the bolt with denatured alcohol or equivalent and allow to dry.
    • Apply threadlocker GM P/N 12345382 (Canadian P/N 10953489).
  3. Install the link assemblies.
  4. Install the link bolts.

    5. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the nuts to the link bolt assembly.

    6. Tighten
    Tighten the nuts to 23 N·m (17 lb ft).

  6. Lower the vehicle.