If the vehicle has this feature, the controls for the memory function are located on the driver door.
1: Saves the seating position for driver 1.2: Saves the seating position for driver 2.
: Programs and recalls the easy exit position.
These buttons are used to program and recall memory settings for the driver seat and both the driver and passenger outside mirrors. The settings for these features can be saved for up to two drivers.
To store the memory settings:
- While the vehicle is in P (Park), adjust the driver seat, including the seatback recliner, lumbar, and side wing area, and both outside mirrors to a comfortable position.
- Press and hold button 1 until a double chime sounds to let you know that the position has been stored.
A second seating and mirror position can be programmed by repeating Steps 1 and 2 and pressing button 2.
To recall the memory positions, the vehicle must be in P (Park). Press and release either button 1 or button 2 corresponding to the desired driving position. A single chime will sound and the memory position will be recalled.
To stop recall movement of the memory seat feature at any time, press one of the memory buttons or power seat controls.
Easy Exit Seat
To store the seat exit position:
- Press and release the button 1. The seat will move to the stored memory position.
- Adjust the seat to the desired exit position.
- Press and hold the exit button until a double chime sounds to let you know that the position has been stored.
A second seat exit position can be programmed by repeating Steps 1 through 3 and pressing button 2.
| • | Press the exit button on the memory control. |
| • | If this feature is activated in the DIC, removing the key from the ignition will move the seat to the exit position. |
See "Easy Exit Seat" under DIC Vehicle Customization for more information on activating this feature in the DIC.
