GM Service Manual Online
For 1990-2009 cars only

Your vehicle is equipped with a content theft-deterrent alarm system.


Object Number: 811473  Size: A1

With this system, the security light in the instrument panel cluster will flash as you open the door if your ignition is off.

This light reminds you to activate the theft-deterrent system.

To activate the theft-deterrent system:

  1. Open the door.
  2. Lock the door with the Remote Keyless Entry (RKE) transmitter. The security light will illuminate to inform the driver the system is arming. If a door is open when the doors are locked, the security light will flash.
  3. Close all doors. The security light should go off after about 30 seconds. The alarm is not armed until the security light goes off.
  4. If the delayed locking feature is turned on, the theft-deterrent system will not start the arming process until the last door is closed and the delay timer has expired. See Delayed Locking .

If a locked door is opened without the RKE transmitter, the alarm will go off. The headlamps and parking lamps will flash and the horn will sound for 30 seconds, then will turn off to save the battery power.

Remember, the theft-deterrent system will not activate if you lock the doors with the vehicle's key or use the manual door lock. It activates only if you use a power door lock switch with the door open, or with the RKE transmitter. You should also remember that you can start your vehicle with the correct ignition key if the alarm has been set off.

Here is how to avoid setting off the alarm by accident:

    • If you do not want to activate the theft-deterrent system, the vehicle should be locked with the door key after the doors are closed.
    • Always unlock a door with the RKE transmitter. Unlocking a door any other way will set off the alarm.

If you set off the alarm by accident, press unlock on the RKE transmitter or place the key in the ignition and turn it to START to turn it off. The alarm will not stop if you try to unlock a door any other way.

Testing the Alarm

To test the alarm:

  1. From inside the vehicle, lower the driver's window and open the driver's door.
  2. Activate the system by locking the doors with the power door lock switch while the door is open, or with the RKE transmitter.
  3. Get out of the vehicle, close the door and wait for the security light to go out.
  4. Then reach in through the window, unlock the door with the manual door lock and open the door. This should set off the alarm.

While the alarm is set, the power door unlock switch is not operational.

If the alarm does not sound when it should but the headlamps flash, check to see if the horn works. The horn fuse may be blown. To replace the fuse, see Instrument Panel Fuse Block and Underhood Fuse Block .

If the alarm does not sound or the headlamps do not flash, the vehicle should be serviced by your dealer/retailer.