Important: Clean the area around the camshaft position (CMP) sensor before removal in order to prevent debris from entering the engine.

1. Remove the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .
2. Disconnect the CMP sensor electrical connector.
3. Remove the CMP sensor bolt.
4. Remove the CMP sensor.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the CMP sensor.
2. Install the CMP sensor bolt.

Tighten
Tighten the bolt to 25 N·m (18 lb ft).

3. Connect the CMP sensor electrical connector.
4. Install the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .