Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

Preliminary Procedure

Caution: Refer to Battery Disconnect Caution in the Preface section.

1. Turn all lamps and accessories OFF.
2. Turn the Ignition to the OFF position.

1

Negative Terminal Nut

Notice: Refer to Fastener Notice in the Preface section.

Tighten
9 N·m (80 lb in)

2

Negative Battery Cable