GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2008 🢒 H2 🢒 Driveline/Axle 🢒 Front Drive Axle 🢒 Front Axle Vent Hose Connector Replacement

Removal Procedure
  1. Raise the vehicle. Refer Lifting and Jacking the Vehicle .
  2. Remove the engine protection shield. Refer to Engine Protection Shield Replacement .

    3. Object Number: 1335147 Size: SH
  3. Disconnect the vent hose from the vent hose connector.

    4. Object Number: 1335150 Size: SH
  4. Remove the vent hose connector.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1335150 Size: SH
  1. Install the vent hose connector.

    2. Tighten
    Tighten the vent hose connector to 20 N·m (15 lb ft).


    Object Number: 1335147 Size: SH
  2. Connect the vent hose to the vent hose connector.
  3. Install the engine protection shield. Refer to Engine Protection Shield Replacement .
  4. Lower the vehicle.