GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2008 🢒 H2 🢒 Body Systems 🢒 Vehicle Access 🢒 Door Striker Replacement

Removal Procedure
  1. Mark the striker position with a grease pencil prior to removal, to retain proper alignment.
  2. Open the door.

    3. Object Number: 838823 Size: SH
  3. Remove the fasteners retaining the striker to the door frame.
  4. Remove the striker.

Installation Procedure

    Object Number: 838823 Size: SH
  1. Align the striker with the alignment marks made with the grease pencil.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the fasteners retaining the striker to the door frame.

    3. Tighten
    Tighten the fasteners to 27 N·m (20 lb ft).

  3. Operate the door to check for proper operation and alignment.